6.5X47mm Lapua 24" Vs 26"

[catwork]

I was woundering how much differeance it would be between the 2 length from 100yds to 1000yds looking at a M24 contour and not sure if the smith can keep it at 26" so looking at 24" 25" or 26" 26 if posible barrel is 1-8 twist what are the pros and cons between 24 and 26" down range?

 

[2bad4u2]

Very little to no difference depending on your combination of reloading compnents. At best, you're talking 50 fps. perhaps less.