Yes!!! Been shooting 6mm for half of forever, and truly like the chambering. Here's a few loads, with the caveat that you always start 6% below listed load and work up to be sure it's safe in your rifle.
70 gr Ballistic Tip/Win brass/WLR primer/47gr W760.
70 gr Ballistic Tip/Win Brass/WLR primer/49 gr IMR4350
95 gr Nosler Partition/Win Brass/WLR primer/48 gr Reloder 22
95 gr Ballistic Tip/Win Brass WLR primer/47 gr IMR 4831
100 gr Partition/Win Brass/WLR primer/47.5 gr Norma MRP (RL22 should be similar)
100 Partition/Win Brass/WLR primer/47.0 gr H4831
100 Partition/Win Brass/WLR primer/50 gr IMR7828
105 Speer/Win Brass/WLR primer/48 gr Vihtavuori N165
All of these will shoot under MOA in my Remington, a couple shade ½moa. Good Luck with your 6mm, Regards, Eagleye.