6mmBR modified case

dakota123

dakota123

Regular
Rating - 100%
27   0   0
Anyone know where I can source a 6mmBR modified case for the Hornady OAL gauge?

I’m so close, Zermatt bighorn, PVA 26” prefit, AG composite carbon fibre stock, 2 stage TT special, just hunting for a decent Black Friday deal for a optic and it’ll be range time.
 
dakota123 said:
Anyone know where I can source a 6mmBR modified case for the Hornady OAL gauge?

I’m so close, Zermatt bighorn, PVA 26” prefit, AG composite carbon fibre stock, 2 stage TT special, just hunting for a decent Black Friday deal for a optic and it’ll be range time.
Click to expand...
I ordered the tap from Amazon to make my own
Cat
 
^^ this - made my own also. Using your own fired brass from that particular chamber will give the most accurate results.
Hard to say if it made any difference other than with an OCD mind...the 6br's shoot so good.
 
Tap is 5/16-36
Drill size 9/32. A pilot point or vortex point is easier to use

Corrected - I typed it wrong lol
 
Last edited:
dakota123 said:
Pretty sure I found a local shooter with the tap that’ll make me one, thanks for the info
Click to expand...
You need to go through a handful of fired cases and find one a bullet will slide into the neck smoothly without being too loose or too tight. It's a just right sort of thing you are looking for.

Have several cases drilled and tapped. If you are having one made you may as well have two made.
 
I Dont Care About You said:
You need to go through a handful of fired cases and find one a bullet will slide into the neck smoothly without being too loose or too tight. It's a just right sort of thing you are looking for.

Have several cases drilled and tapped. If you are having one made you may as well have two made.
Click to expand...
Lucky for me I have a good connection that knows his stuff. Pretty well known for his trigger springs 😉
 
dakota123 said:
Anyone know where I can source a 6mmBR modified case for the Hornady OAL gauge?

I’m so close, Zermatt bighorn, PVA 26” prefit, AG composite carbon fibre stock, 2 stage TT special, just hunting for a decent Black Friday deal for a optic and it’ll be range time.
Click to expand...
I'd be happy to make one for you. Just cover the shipping back to you and mail me 2 fired cases. PM me if interested.

Buying one is fine, but having one made from brass fired in your rifle will fit your chamber perfectly.
 
Canuck65 said:
I'd be happy to make one for you. Just cover the shipping back to you and mail me 2 fired cases. PM me if interested.

Buying one is fine, but having one made from brass fired in your rifle will fit your chamber perfectly.
Click to expand...
Thanks for the offer I very much appreciate it, I ended up finding a local guy that’s going to do up a couple cases for me.
 
You must log in or register to reply here.
Back
Top Bottom