7.92 x 33 kurz
- Thread starter rmckeon
- Start date
From Barnes Cartridges of the World. No experience with these - your call. Third appears to be original factory load. Real in six columns: bullet weight in gr/powder type/powder weight in gr/MV in fps/ME in ft/lb/remarks:
125/4198/20/2,070/1,193/-
125/4198/23/2,310/1,485/Max
125/ FL / - /2,247/1,408/200 yd MRT=5.2"
125/4198/20/2,070/1,193/-
125/4198/23/2,310/1,485/Max
125/ FL / - /2,247/1,408/200 yd MRT=5.2"
BattleRife
CGN Ultra frequent flyer
- Location
- of No Fixed Address
PM me an email address and I will forward you (and anyone else who asks) the Kurz data I collected a couple of years ago when researching the BD-44. I never ended up buying the gun, so I have tried none of the data, but it has 20 or so loads using maybe half a dozen different powders.
Last edited:
I have fired approximately 150 rounds of;
125gn HPHornady over 23.7gn of IMR 4227. This is using a moly coated bullet through a moly prepped barrel. I would start at least 1.0gn lower with the powder charge if not using moly.
Quickload is your friend for this cartridge.
125gn HPHornady over 23.7gn of IMR 4227. This is using a moly coated bullet through a moly prepped barrel. I would start at least 1.0gn lower with the powder charge if not using moly.
Quickload is your friend for this cartridge.
