7mm rem mag case denting update

R

rudy200

Regular
Rating - 100%
35   0   0
Hi

I had posted a case denting problem I was having with a new set of Lee deluxe 7mm rem mag dies which I found no cure for.
As stated in my earlier post I returned them to Lee Precision for a check over.
Lee returned the dies with a letter stating the vent hole was the problem
and repaired it also sent along a tube of Lee lube to try. Well the denting problem is fixed for those who had problems. Thanks to Lee Precision for the
good customer service
 
rudy200 said:
Hi

I had posted a case denting problem I was having with a new set of Lee deluxe 7mm rem mag dies which I found no cure for.
As stated in my earlier post I returned them to Lee Precision for a check over.
Lee returned the dies with a letter stating the vent hole was the problem
and repaired it also sent along a tube of Lee lube to try. Well the denting problem is fixed for those who had problems. Thanks to Lee Precision for the
good customer service
Click to expand...

is this from the vent holes being clog with dried up lube and grime,or from from a factory defect(such as the vent hole was not drilled right through the die)?
 
You must log in or register to reply here.
Back
Top Bottom