7mm Rem Mag Cast bullet loads

P

pacobillie

CGN frequent flyer
Rating - 99.3%
144   1   0
Location
Quebec
I am looking for load data (plinking loads) for cast bullets in 7mm Rem Mag.

The bullets that I have on hand are 154 gr. FN and are gas Checked and pre-lubed.

I would like to keep velocities down (below 2000 fps), to avoid leading the barrel.

Powders that I have available, from fast to slow (burn rate) :

Titewad, Red Dot, Bull's Eye, HP-38, W244, H4198, IMR4198, H322, H4895, IMR4895, H380, LVR, H414, H4831, IMR4451, IMR4955, IMR7828, RL26, N570.

Before anyone suggests IMR Trail Boss, I have none and it is back ordered almost everywhere.
 
From the sticky in this thread on cast data, there is this PDF
h ttps://docs.google.com/spreadsheets/d/1cjuw_nZ44l1F1aWESOLpkEa2FFVdANhKtWY-wAEfPZw/edit?usp=sharing

There is about 20 listings for 7mm Rem Mag. 3 of them are within 1 grain weight of your bullets, but those 3 don't have the powders you have listed unfortunately
 
You must log in or register to reply here.
Back
Top Bottom