- Location
- Coquitlam, BC
Got a box of these babies for my 7WSM. Does anyone have a load they could share? I'll be using H4831sc, Win brass, CCI LR primers. Figure to be a moose/deer/blackie load. Thanks 
7WSM load for 140gr TTSX?
- Thread starter rishu_pepper
- Start date
7WSM Load
Sorry, I don't have a recipe for that particular powder, but I have been using 60.5 grains of H414 with 140 grain bullets for several years, and it sure works well in my rifle. Velocity is between 3000 and 3100 fps.
Erik.
Sorry, I don't have a recipe for that particular powder, but I have been using 60.5 grains of H414 with 140 grain bullets for several years, and it sure works well in my rifle. Velocity is between 3000 and 3100 fps.
Erik.
Starting load 61.0 grs (2869 fps), max 66.5 (3089 fps) and 95% load density.
Max case length 2.100 (I'd trim to 2.090), max OAL 2.860" (min 2.560")
Haven't seen ANY WSM yet that didn't appreciate a warm load, most of them seem to have a sweet spot somewhere around 0.5 - 1.0 grs under max. Good luck - I like the 7mmWSM. Lot of potential.
Note; These are for the TSX, MRX and BND Spitzer - the TTSX data wasn't ready when the latest Barnes #4 manual was printed. Check the website.
Max case length 2.100 (I'd trim to 2.090), max OAL 2.860" (min 2.560")
Haven't seen ANY WSM yet that didn't appreciate a warm load, most of them seem to have a sweet spot somewhere around 0.5 - 1.0 grs under max. Good luck - I like the 7mmWSM. Lot of potential.
Note; These are for the TSX, MRX and BND Spitzer - the TTSX data wasn't ready when the latest Barnes #4 manual was printed. Check the website.
- Location
- Coquitlam, BC
Thanks gentlemen. I shall give her a try, once I get me a chrony. For now, I think I'll stick with the 140gr Partitions given by the previous owner.
