7x57 stripper clips?

[whitey07]

Anybody know where to get the correct stripper clips for my Brazilian m1935

 

[Eaglelord17]

There are three major chargers (stripper clips) types for the Mausers. If they use the 3 bump version (latest) then they can be found here
http://www.tradeexcanada.com/content/k98-m98-stripper-clips-8mm--

If it uses the other types (2 bump or no bump) then ebay is the only place besides maybe gunshows. Hope this helps.

 

[sail32]

A picture comparison of the receiver bridge of a Brazilian m1935 and a German K-98, it would appear you can use the 3 bump chargers mentioned by Eaglelelord17.

The width of the chargers may be an issue, check the two rifles mentioned.

I think that the Mauser cartridges, 8x57mm, 7x57mm and 7.65, all use the same basic case before neck and length resizing.

 

[green]

The clip for the 7.9x57 (3lug) is narrower than the one for the 7x57 (2lug) and the clip slots in the rifle are built to fit the respective clip.

 

[whitey07]

Yes that's right my 8mm Mauser clips don't work.

 

[Cdn303]

What about 6.5x55 ones. They are two lug.