9mm: Copper Plated with Titegroup/Win231 Load Data?

[gregb]

Just curious to see what others are using as load data for 124gr Copper Plated Bullets. (Frontier specifically).
The Hodgdons Reloading Center lists info for 125gr FMJ, but no info for the 124gr CP.

I am only looking for the following information:

1. 9mm / 124gr CP Bullet with Titegroup: Min/Max?
2. 9mm / 124gr CP Bullet with Win 231: Min/Max

Thanks.

 

[chise]

Do you have your respirator? A couple advil before starting might stop your headaches.

 

[gregb]

Do you have your respirator? A couple advil before starting might stop your headaches.

.............................

 

[on-ca]

124gr Frontier CRN + 4.5 gr Win231 => 1115fps out of a Glock 17 stock barrel.
I think manual indicates lower velocity for a FMJ. The CRN does come out quicker due to more pressure build up in my opinion over an FMJ, but nothing that is excessive.

I forget OAL length now but I think I kept it close to factory FMJ specs.

Hope this helps.
on-ca

 

[gregb]

124gr Frontier CRN + 4.5 gr Win231 => 1115fps out of a Glock 17 stock barrel.
I think manual indicates lower velocity for a FMJ. The CRN does come out quicker due to more pressure build up in my opinion over an FMJ, but nothing that is excessive.

I forget OAL length now but I think I kept it close to factory FMJ specs.

Hope this helps.
on-ca

Thanks On-Ca, Sticking with the Factory OAL (FMJ specs and I should be good).