X xgunner Member Rating - 100% 45 0 1 Location Sudbury, ON Jun 8, 2010 #1 Anybody have a good accurate load for the 9mm
IM_Lugger CGN Ultra frequent flyer Rating - 100% 216 0 0 Location Hamilton Jun 8, 2010 #2 My ipsc load is 5.5gr of N350 behind 124gr plated bullet.
sulisa CGN Ultra frequent flyer Rating - 100% 52 0 0 Location Eeeeesst Jun 8, 2010 #3 3.4gr WST and 147gr FMJ FP Frontier. (it's tame in my gun - use at your own risk, of course) Your dies would come with a pile of recipes, and Hodgdon.com can help with others.
3.4gr WST and 147gr FMJ FP Frontier. (it's tame in my gun - use at your own risk, of course) Your dies would come with a pile of recipes, and Hodgdon.com can help with others.
Canuck223 CGN Ultra frequent flyer Rating - 100% 80 0 0 Location GTA Jun 8, 2010 #4 I'm using 147gr Frontiers with 3.5gr VV N320 and Federal primers. Accurate, light recoiling, and clean burning.
I'm using 147gr Frontiers with 3.5gr VV N320 and Federal primers. Accurate, light recoiling, and clean burning.
pmt CGN Ultra frequent flyer Rating - 100% 7 0 0 Location AZ Jun 8, 2010 #5 I'm using 4.0gr of Titegroup behind 124gr plated Frontiers and 4.2gr with the 122(ish) gr plated AIM bullets.
I'm using 4.0gr of Titegroup behind 124gr plated Frontiers and 4.2gr with the 122(ish) gr plated AIM bullets.
