9mm military brass?

[TrxR]

Anyone here reload using 9mm military brass? If so what precedure do you use for depriming and dealing with the crimp?

Thanks

 

[RePete]

I do but I use a Dillon 1050 and that has a primer pocket swager built on it.

Prior to that I reamed the crimps out.

 

[Ar180shooter]

Anyone here reload using 9mm military brass? If so what precedure do you use for depriming and dealing with the crimp?

Thanks

Normal depriming procedure has always worked for me on 5.56 brass, can't see it being any different with 9mm. I have been reaming the crimps out, but I'm looking for an RCBS primer pocket swaging tool which is much easier/faster.

 

[BlackSheepBrass]

Be aware that if it is an IVI NT piece of brass that the primer pocket is actually smaller by about .005". They lock up my Camdex processor occasionally, and even if they make it through they still tend not to take a primer well.

BSB

 

[zthou]

Dillon Swager

 

[brewmech]

Too much other brass available to mess around with crimped 9mm brass.

 

[zuke]

I use a metal countersink chucked into a benchtop drill press. Take's a split second. Also used a cordless drill

 

[IRC]

I use a metal countersink chucked into a benchtop drill press. Take's a split second. Also used a cordless drill

Me Too! Very fast and little to no set up time.

 

[KellyP]

Not worth the pain in the ass to mess with, where I am there is plenty more other brass to use. Personally I would not bother.