AccuChamber

*lawrence

CGN frequent flyer
Rating - 100%
135   0   0
Location
West Coast
Have you read about the new innovative AccuChamber that’s been developed for rimfire? It seems that it’s a split chamber that opens slightly in two halves, inserts a round and then reforms it to a set specification. The developers claim that it will ‘smooth’ out variations in any rimfire ammo and the resulting uniform ammo will be much more accurate.

More details soon from them I expect…..
 
Last edited:
I found the information.

Forget the accuchamber. These phony gimmicks never work after a few months or a year at most.

There is a guy who is singlehandedly helping to invent a new kind of bullet that promises to be a real gamechanger. When it's adapted to .22LR it will allow faster MVs with less wind drift than with standard velocity ammos. It's a well-known secret in Birmingham and Schönebeck (where Eley and Lapua, respectively, are produced) that both match ammo makers will pool their resources to get this revolutionary technology.

See the preliminary information below.



 
actually what follows is true

had some barts 68’s 6mm for SR BR that was in a basement with a cistern for a few years

sold some to a guy out of province and took them back as they were mottled

shot them and they were the best grouping lot number I ever had

spoke to,a rocket scientist who designs the space shuttle MODDELING for wind tunnel type resistance as he was a friend of a friend and he said

IT WAS THE GOLF BALL EFFECT

the mottelling took and broke up the push from the bullet not being perfect and overcame the wind
the mottling was overcome BECAUSE OF THE SPINNING OF THE BULLET

did you know the bullet spins at approximately 180 thousand revolutions I think

true story notwithstanding the day
 
actually what follows is true

had some barts 68’s 6mm for SR BR that was in a basement with a cistern for a few years

sold some to a guy out of province and took them back as they were mottled

shot them and they were the best grouping lot number I ever had

spoke to,a rocket scientist who designs the space shuttle MODDELING for wind tunnel type resistance as he was a friend of a friend and he said

IT WAS THE GOLF BALL EFFECT

the mottelling took and broke up the push from the bullet not being perfect and overcame the wind
the mottling was overcome BECAUSE OF THE SPINNING OF THE BULLET

did you know the bullet spins at approximately 180 thousand revolutions I think

true story notwithstanding the day


MV x 720/rot = rpm.

Some of my loads are over 250,000 rpm.
 
i found the information.

Forget the accuchamber. These phony gimmicks never work after a few months or a year at most.

There is a guy who is singlehandedly helping to invent a new kind of bullet that promises to be a real gamechanger. When it's adapted to .22lr it will allow faster mvs with less wind drift than with standard velocity ammos. It's a well-known secret in birmingham and schönebeck (where eley and lapua, respectively, are produced) that both match ammo makers will pool their resources to get this revolutionary technology.

See the preliminary information below.




april fools;)
 
Last edited:
Back
Top Bottom