adjusting the trigger vtr

[viper]

Hey guys
My friend would like to know what screw to adjust on his Rem vtr, to adjust the trigger.

 

[RePete]

There are 3 to worry about and if done incorrectly, it will leave you with an unsafe gun.

Have him take it to a gunsmith who knows what he's doing.

 

[pilgrim]

google it.....can be done, but better to go to a gunsmith, but I personally would not trust everyone

 

[Duck_Hunter]

likely only the pull weight will be able to be adjusted(with gun out of stock, and upside down, there are two screws on front of trigger assembly, pull weight is top screw). The new epoxy remington uses is crazy. To do a "proper" job all three screws should be adjusted. Use a scale to check that the trigger pull weight is consistent(I use a rapala digital fish scale), and make sure to go through the steps to make sure the sear won't accidently slip(slam bolt a bunh of times, engage/disengage safety, etc)!
Using only the weight adjustment I got my 700P to 2lbs10ozs safely.

 

[Satain]

Hope this helps!

It did for my Remington 700 308 Win. VTR model with the X-Pro trigger.

 

[sunray]

Go here. http://www.quarterbore.com/library/articles/rem700trigger.html