I posted a similar question on the gunsmithing forum but thought the rimfire forum might have a BRNO expert or two. Briefly the magazine follower has become jammed edgewise in the factory 10 shot 22lr magazine for my BRNO #5, bolt action 22 lr rifle, serial #0022x. There looks to be a small dimple on the bottom of the mag but I am unsure if the mag can be taken apart for adjustment. I do not want to force anything and would welcome any advice. I have also posted a WTB add in the bits and pieces forum. Thanks.
Advice needed- BRNO #5 mag problem.
- Thread starter hiredgun
- Start date
If its like a cz mag on the bottom you will see what looks like a small hole at one end of the mag .use a small punch or needle and insert into hole and depress the catch and the bottom of the mag should slide off. watch that you don't loose the retaining pin as it is spring loaded.
Last edited:
