AK103 furniture for T81

bfiles

bfiles

CGN Ultra frequent flyer
Super GunNutz
Rating - 99.1%
416   4   3
Location
Training in Camp X
Well, looks like a collaboration between myself and Millennium has resulted in a Ak103 stock set to fit and work with the T81 line of rifles....

Now Millenium is the go to man for people wanting full sets (upper/lower handguard, pistol grip & stock with buttplate) so anyone wanting to get a set needs to contact him.

These sets will be available VERY soon.

They are some of the toughest sets I've ever had a chance to torture. Drop tested, whack with hammers, mortared on my work bench and nothing has cracked, chipped, deformed or split. Heat didn't seem to affect the handguards in anyway (mind you we aren't shooting full auto of full cap mags) but still no flexing after firing off strings.

I'm truly amazed at how good these are made.

And I'm not the one even selling them, I just helped come up with design and R&D along with testing and abuse

Stocks will come with heat sunk metal inserts to reinforce top mounting bolt (same way I made and had TI do for the Gen 2 SR stocks) so no need of stripping or crack9ng of the stock in anyway (yes it was tested) all hardware is included.
Stocks fit cleaning kits in them aswell

20240606-151215.jpg

20240606-151221.jpg


Stock will be able to utilize sling mount & bolts right off of the T81 fixed stock (or use a real AK103 sling mount like me)

20240606-181253.jpg


Buttplates will be printed that come with the option for normal or extra thick plates to extend LOP or shorten it depending on want and will also have heat sunk inserts for the mounting bolts.
Buttplates tho thin have be subjected to hammer strikes, dropped and still held up with no cracking or breaking.
They are also ribbed in design for OUR PLEASURE

20240606-181217.jpg


Handguards (upper and lower) & pistol grips have already been out for sale for a bit along with being tested from previous customers and are made with the exact same material as the stock/buttplate.
No issues of any kind have been reported or found with these parts.

Full complete sets will consist of this (along with all mounting hardware) minus sling mounts.

IMG-20240606-WA0010.jpg


Now for the good stuff -

These are the exact same sets that will be available

20240606-181351.jpg

20240606-181426.jpg

20240604-000124.jpg

20240603-223431.jpg

20240603-223634.jpg

20240603-225419.jpg

20240603-225208.jpg


I hear a normal AK stock and handguard might be in the works soon too ;-)
 
Looks great! Can you just remove the top part of the handguard to clean, or does the whole thing have to come off, like with the factory Type M/LMG handguard, as documented by GunNutzGuy on YouTube.

GNutzGuy said:
[video=youtube_share;ch3KC9Nyewc]https://youtu.be/ch3KC9Nyewc?feature=shared[/video]
Click to expand...
 
Is the butt stock equipped with a trap door, or does one have to unscrew the cover to get at the compartment?
What is the length of pull?
 
beltfed said:
Is the butt stock equipped with a trap door, or does one have to unscrew the cover to get at the compartment?
What is the length of pull?
Click to expand...

I'll measure and get back to ua but it's aboutn1/2" longer then the standard T81 wood stock but can be lengthen with thicker buttplates
 
Guy who makes them here. Will do my best to answer your questions over the coming days. So here's a general FAQ:

Do they work with the M versions only or also the SE/SA?

The retaining ring on the M and LMG is more square than the SA. I have two models - one for the M/LMG and one for the SE/SA. They are not cross-compatible, so you'll have to buy one for your respective unit.

Does the buttstock have a slot for the cleaning kit? Is there a trapdoor?

The buttstock has a slot for the square cleaning kits. You would have to unscrew it to get in, but I figured that would be better than leaving it out of the gun entirely since the factory wood stock has a regular round cleaning kit slot.

What are these made out of?

Carbon fiber nylon. They are heat, chemical, and impact resistant. Just yesterday, I went to the range and fired off 350 rounds in under an hour. The barrel was hot to the touch, yet the handguard was lukewarm at best. I could barely even turn the metal sights without burning my finger to get the upper handguard off. Yet the heat barely transferred to the polymer. No melting, no deforming, no nothing.

When will these be available?

Over the coming weeks, I will take a limited amount of pre-orders. These stocks are rock solid, but they are difficult, costly, and time consuming to make. I will do my best to post updates here. For now, please PM me if you are interested!
 
Great work guys !! Looking forward to getting a fixed stock model in the future and possibly use this set. Can you check ow heavy 4 piece set and 3 piece sets are ? (including tne upper HG metal )
 
Thanks!! Stock weighs in at about 381 grams with the buttpad. Pistol grip is 46 grams. Upper handguard is 37 grams. Lower handguard is 129 grams. Overall, the weight is slightly heavier than the wood, but you get much more durable and aesthetic furniture.

Dmitri said:
Great work guys !! Looking forward to getting a fixed stock model in the future and possibly use this set. Can you check ow heavy 4 piece set and 3 piece sets are ? (including tne upper HG metal )
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom