An all-matching milsurp tragedy

Nipped the tip! ;)

tumblr_l3juofKuTW1qc9pwoo1_1280.png
 
Someone removed the threaded end for the blank firing device.........42gr of IMR 4350 or N204 and a 156-160gr bullet does wonders for relaxing moose.You will have an in and out hole......Harold
 
Yet the Range Plate is intact...... Bubba usually goes at that with gusto with a large screwdriver. That's the location where he carves in the hunting scene (with the same screwdriver it seems).

If you can remove that without damaging it (and hunting with the gun will damage it anyways), it will fetch in the $50-75 range.
 
I picked up one recently that had the same thing PLUS being gunsmithed for a scope, so the scope mounts were added and the bolt was bent and dished for the scope clearance. One odd note though, it still had the old style Carl Gustave flip-up long range sight. Check it out.
 
Not an unmarked disc, but a cadmium plated washer with matching Robertson screw.

AN970 washer !

I will leave the rifle as-is. There was an old gunsmith around here who used to do this before selling them. Guys were complaining about the threads catching on things when hunting. He was an infamous bubba towards milsurps.
 
Back
Top Bottom