Had to get to the range and check it out. Temp 2C, rain, windy, no shelter. Rear sight adjustment went nicely. I shot about 150 rds of 143 gr round nose. Accuracy was a bit better than my CZ75 with a Barsto barrel. My converted CZ75 mags worked well in both guns, except 2 which have weak springs.
I will get the info on reducing DA pull weight. The mag release feels gritty, I'd like to smooth it up. I think a thinner front sight would suit me better. With the good mags, everything functioned perfectly. I think the powder used was SP83, but that's not confirmed.
The big surprise was when I took it apart to clean. The chamber and bore were still bright and shiny, almost no fouling,still giving off that pinkish irridescent glow that it has when freshly cleaned. I've never seen another barrel that has that inside finish, it's like the interference colors of oil on water. There was a tiny sliver of lead in a groove at the crown, but nowhere else.
I will get the info on reducing DA pull weight. The mag release feels gritty, I'd like to smooth it up. I think a thinner front sight would suit me better. With the good mags, everything functioned perfectly. I think the powder used was SP83, but that's not confirmed.
The big surprise was when I took it apart to clean. The chamber and bore were still bright and shiny, almost no fouling,still giving off that pinkish irridescent glow that it has when freshly cleaned. I've never seen another barrel that has that inside finish, it's like the interference colors of oil on water. There was a tiny sliver of lead in a groove at the crown, but nowhere else.
