Another recipe request for 9MM

[johnnyreb65]

I'd appreciate rcipes for the following..

Hornady 124gr FMJ/RN for Winchester 231 and Unique..

Thanks

 

[Paulinski]

4.2 grains of 231 seated to 1.10 OAL.

 

[Buck45]

From hornady's reloading book 7th edition

fmj-rn enc col 1.150

win 231 start load not listed

unique 4 grains 900 fps max load 5 grains 1100

4.5 equals 1000

primer wsp case hornady/frontier pistol 4 inch barrel sw model39

 

[johnnyreb65]

Thanks guys:

1.10 oal isn't that a little short? Book lists as 1.169... Ive set the dies for 1.158,,fits nice in the CZ mag..

 

[Onagoth]

Could seat a few long and gradually go deeper and deeper until no rifling markings appear, this is what was recommended to me

 

[CeeZer]

Many CZ guns like it short. It's not as relevant how it fits in the mag as how reliable is feeding, accurate is shooting and pressures.

I know hight level competitors who load at 1.08 for their CZs. I load short too.

Every bullet shape and particular barrel will dictate different OAL.

 

[patman18]

4.3grains and col 1.150
little on the light side but works great for pratice ammo

 

[John in B.C.]

Thanks guys:

1.10 oal isn't that a little short? Book lists as 1.169... Ive set the dies for 1.158,,fits nice in the CZ mag..

You might want to load up a dummy round at that length and try it in your pistol before cranking out a bunch of ammo. None of my nines would run ammo at that length.

John

 

[CeeZer]

Ok, just went and measured factory ammo - WinClean 124gr - 1.09; Rem JHP 115gr - 1.07.

 

[Onagoth]

You might want to load up a dummy round at that length and try it in your pistol before cranking out a bunch of ammo. None of my nines would run ammo at that length.

John

Thats weird, I just measured my 124 gr winchester and it came in at 1.15"