Anschutz 1361 single shot 22 part needed (rear sight)

[grimblyd]

My first gun given to me by my dad when I was 12. I think someone owed him money from a poker game, and he took it as payment.
Anyway, some time in the last several decades I found a rear sight that 'looked cool' and replaced my original sight with it. Probably tossed the original in a box or someplace and haven't been able to find it since.

Flash forward to present. The sight I replaced it with doesn't work. The closest I could get it to sight in was about 2 feet HIGH, with the aperture right at the bottom.

Any suggestions where I could find one? Or anyone have one that they'd like to sell me?

I'll also post in the EE parts for rimfires section

Thanks

Dan

 

[grauhanen]

You might be looking for a "sight leaf" and "sight adjuster" as in Parts 34A and 34B here https://www.gunpartscorp.com/Manufacturers/Anschutz-33122/1388-34531.htm?page=2
Of course you might check Western Gun Parts in Edmonton to see if they have what you need.
If none of this is helpful, can you post a picture of the 1361?

 

[Innercity]

Flash forward to present. The sight I replaced it with doesn't work. The closest I could get it to sight in was about 2 feet low, with the aperture right at the bottom.

Dan

This aperture is the front sight?

 

[grimblyd]

This aperture is the front sight?

No. The rear that I replaced it with is similar to the sight that comes with the Ruger 10/22. The front on this is the original, which is a circle peep sight. Thanks though.

 

[grimblyd]

You might be looking for a "sight leaf" and "sight adjuster" as in Parts 34A and 34B here https://www.gunpartscorp.com/Manufacturers/Anschutz-33122/1388-34531.htm?page=2
Of course you might check Western Gun Parts in Edmonton to see if they have what you need.
If none of this is helpful, can you post a picture of the 1361?

Yah! 34a and 34b look like it! I'll follow up with these folks and Western gun parts on Monday. Thanks!

Dan

 

[Innercity]

No. The rear that I replaced it with is similar to the sight that comes with the Ruger 10/22. The front on this is the original, which is a circle peep sight. Thanks though.

You raise a rear sight to raise the point of impact. You lower a front sight to raise the point of impact.
FART
Front Away
Rear Towards

You got your adjustments bassackwards if your rear sight is all the way down....

 

[grimblyd]

You raise a rear sight to raise the point of impact. You lower a front sight to raise the point of impact.
FART
Front Away
Rear Towards

You got your adjustments bassackwards if your rear sight is all the way down....

You're correct, I meant 2 ft high and randomly put low. edited original post to fix that.

 

[Innercity]

You're correct, I meant 2 ft high and randomly put low. edited original post to fix that.

No wonder i was confused..

 

[grauhanen]

Some for sale on EE http://www.canadiangunnutz.com/forum/showthread.php/1430759-Anschutz-22-front-and-rear-sights