any good loads for 338 06 ai with tsx.

J

joe

New member
Rating - 100%
120   0   0
my gaillard 338 06 ai just arrived on friday and i cant find any data on the ai version with tsx bullets. i have some 210 and 225s. they dont list the ackley in the manual only the scoville. tsx are 60 bucks for 50 so some help would be nice. thanks for the help
 
I'm shooting 61gr H414 right now in my 338-06AI with 225gr Accubonds-still playing with loads and powders.

Shot some 225 TTSX's (59.0gr H414) but only when I was fireforming the brass (338-06AS). HAve yet to develope loads.
 
joe said:
my gaillard 338 06 ai just arrived on friday and i cant find any data on the ai version with tsx bullets. i have some 210 and 225s. they dont list the ackley in the manual only the scoville. tsx are 60 bucks for 50 so some help would be nice. thanks for the help
Click to expand...

The Scoville is an AI variant, just use the starting data and work up...

After paying for a custom rifle, whats another $120 for bullets...:)
 
I'm using 59 grs of IMR4350 with 215gr Sierra's in a straight 338-06. This shoots well in my gun but I plan to step it up for next season. If 4350 is a powder you like then I would think this would be a good starting point.
 
Mighty Peace said:
I'm shooting 61gr H414 right now in my 338-06AI with 225gr Accubonds-still playing with loads and powders.
Click to expand...

Shooting the same load in a straight .338-06 but with the 210 TSX and getting a very impressive 2850 fps out of them (Lapua '06 brass opened up) and a more often than I'd like smack between the eyebrows - yesterday it was the nose too. Light gun and it has some thump on both ends!
 
You must log in or register to reply here.
Back
Top Bottom