Any way to reduce trigger effort on cooey 60?

[TOPH R]

Now that I have her scoped up, I must say I am impressed at how accurate she is, however as most of you know, the pull on a cooey model 60 is crazy stiff.

Is there any way to modify the trigger?
Anyone have any tips?

 

[texdores]

I reduced mine to about 250 grams. Take the trigger group apart and have a look at the hammer and sear engagements. Then very little at a time using a small honing stone smoothen out any uneveness(use a magnifying glass). Or use 600 silicon carbide paper to polish any rough surfaces. I am an amateur and since there was nothing to lose with the Coeey I took a gamble. And it worked for me. Go S-l-o-w-l-y. And good luck.

 

[Slash5]

Have you measured that trigger pull or just an estimate? That would be just over an 8 oz trigger.

My Walther, with the trigger screw in the target shooting position, has a 12 oz trigger, measured with the Lyman digital scale. It's scary light - usually takes several shots just to get the feel of the trigger, it's going off before you are fully settled on the target.
In the sporting position, the trigger is 3lb, 3oz, and has a nice light feel to it.

 

[Calum]

Finger exercices.