Anyone have 10mm data for 135grn 10mm?

[B]

Using a 135grn Sierra bullet it's surprisingly hard to find, need data for either Blue Dot or AA#9. Kind of getting the impression they aren't suitable for a bullet that light. If not, powder suggestions are appreciated. I wanna push them fast, but nothing silly. I was thinking 1700fps or so?

EDIT: found some using 800X, some of the velocities are TOASTY

 

[RePete]

From Sierra.

10mm Auto
Primer: CCI-300 Test Firearm: Colt Delta Elite
Case: Norma BBL Length: 5"
Twist: 1x16" Trim-to Length: 0.987"
Bullets:
#8425 10 mm (.400) 135 gr. JHP OAL 1.250

Powder/Velocity 1100 1150 1200 1250 1300
AA-No.5 8.9
9.2
9.5
9.7
10.0

Univ. Clays 7.8
7.9
8.1
8.2
8.3

Viht N340 7.1
7.4
7.7
8.0
8.3

Viht 3N37 8.7
8.9
9.2
9.4
9.7

AA-No.7 10.9
11.5
12.2
12.9


HS-7 10.1
10.5
10.9
11.3
11.8

Blue Dot 10.9
11.3
11.8
12.2


Energy/ft.lbs. 363 397 436 469 507
Accuracy Load: Viht N340/ 8.0grs. 1250fps/ 469ft. lbs.
Hunting Load: Viht N340/ 8.3grs. 1300fps/ 507ft. lbs.

 

[SUPERMAG]

10mm 135

Go to Hodgens site

loads for lots of powders

currently loading 135 .400 jhp's & 138 .401 fronteir restruck plated in 40 cal
to 1300-1400 fps

found longshot & IMR 4756 to work the best, with less recoil from
longshot, according to chart lowest pressures with longshot

supermag

 

[B]

Sheesh, I was pushing 175grn silvertips at close to 1400.Why is all the data so wimpy? I know it's usually on the conservative side but that is quite conservative.

 

[SUPERMAG]

10mm 135

sorry I forgot to say I was loading these loads in 40 cal.

supermag

 

[saskgunowner101]

Sheesh, I was pushing 175grn silvertips at close to 1400.Why is all the data so wimpy? I know it's usually on the conservative side but that is quite conservative.

Even the data for .40 S & W and Longshot has been detuned sometime after Feb. of 08.....I have some loads listed, and they all have lower min/max powder charges now.