Anyone have 308 Lapua Palma SRP Brass

[welkie3]

As the title says, I am looking for 4-500 pieces of brass in the same lot. Anyone have or know where any is, would be appreciated!!!
Thanks!!

 

[keegs]

Have you tried hirsch or tesro?

 

[K1LLswitch]

I just ordered 200 from Tesro - says it ships in 1-3 days, so hopefully it’s here soon.

Small rifle primers are another story. :-/

 

[Chilly807]

Small rifle primers are another story. :-/

Bass Pro in Dartmouth NS had CCI BR4 a few days ago, not a lot, but enough that 2 of us were able to get 500 each. They also had some regular CCI 400 primers.

If you're going to shoot in cold weather, I'd suggest using either large rifle primers or magnum small rifle. That's based on my experience with the SRP brass in 6.5 Creedmoor.

They all ignited ok, but SD and ES numbers were significantly higher using regular SRPs in cold weather.
I didn't develop a load using magnum SRPs, just switched to large primer brass for the cold months.

I don't know how much better SRPs are performance-wise in warm weather, if at all. It may just be that the primer pockets stay tighter with hot loads in SRP brass.

 

[Brutus]

As the title says, I am looking for 4-500 pieces of brass in the same lot. Anyone have or know where any is, would be appreciated!!!
Thanks!!

Last time I physically seen this was at Prophet River.
Maybe?

 

[welkie3]

Have you tried hirsch or tesro?

Yes, they were out of stock last time I checked, I guess I need to check again!

 

[welkie3]

Last time I physically seen this was at Prophet River.
Maybe?

I like these guys! Try to get as much as I can from them. Havent seen anything online though, but maybe never updated these on the website.

 

[Brutus]

I like these guys! Try to get as much as I can from them. Havent seen anything online though, but maybe never updated these on the website.

You should call them sir. They recently moved to a much larger location. Maybe not every single thing in thier store is shown online or otherwise.

 

[DANS40X]

Chilly-
It's not a primer size issue-it's a flash hole diameter issue.
Lapua Palma brass has a .062" diameter flash hole.

Remington URBR brass has a.070" diameter flash hole.
I've fired 1000's of rounds down to -20degF w/o internal ballistic issues.

 

[Ruger007]

I used a bunch of Starline SRP 308 brass. Couldn't tell the difference. Should have bought more as I have a pile of small primers from my AR days.

 

[PGW Steve]

Rangesports.ca has some listed.

 

[welkie3]

Rangesports.ca has some listed.

Thank you sir, but they only have one box of a hundred!

 

[tourist]

....