Anyone have a favorite 65,70 or 75gr 6mmrem load?

[cath8r]

Likely have one coming soon. Anyone have a fast and accurate 65 70 or 75 gr load?
Remington 700 varmint special will be the rifle.
Thanks
Rob.

 

[Plumsask]

75 vmax with Imr 4064, fairly stout load, .005 off the lands and I use fed 210GMM primers- not sure they perform any better than regular 210’s. H4350 was the second powder of choice close behind. What are you using it for? Coyotes?

Ave

 

[Plumsask]

I might also add that the 87 vmax is a great Candidate for the 6rem. Im currently building a 6 Ackley ( also have an old rem 788 6mm). But the ackley will be trying the 87 vmax,75 vmax,95 vld and 103 ELD

 

[Eagleye]

70 grain bullet, 47 grains of W760. CCI 200 primer in a winchester case.
Start 3 grains below and work up. EE.

 

[cath8r]

Thanks guys.
I've got imr 4350,varget , 4064 and some 4320 kicking around. Meant to include that in my post. Varmints with no fur saving planned.
Thanks so far!

 

[cdn1canhunt]

Best success for me has been 65gr v-max at 44.1gr imr4350 next is 65gr with IMR 4320 would have to check the load weight.
For 75gr Varget 38.1 gr.

all of these loads have produced 1/2 MOA groups or better at 100yrds savage 1-9.25 twist

My rifle has not liked 4064 with these bullets weights.

 

[hoytcanon]

75 VM over 50.0 grains of RL-19... work up. I use this in my Ruger M77 MKII.

 

[257Roberts]

70 grain bullet, 47 grains of W760. CCI 200 primer in a winchester case.
Start 3 grains below and work up. EE.

EE is right on the money.
My Roberts uses 75 gr with 760 and it works great.
They should be about the same as the case are identical.

David

 

[B-78]

69gr Berger loaded with Superformance is my go to load in my Cooper.