Anyone loads with a PowerPistol or N350 for 9mm CZ?

IM_Lugger

IM_Lugger

CGN Ultra frequent flyer
Rating - 100%
216   0   0
Location
Hamilton
My CZ's doesn't like reloads over 1.10" (my 'regular' loads were 1.145" still a bit short of 9mm max of 1.169")

I'm using Power Pistol and N350 to reload for my 9mm and I'm pretty sure the data calls for an OAL longer than 1.10" so I guess it just means I can't shoot max loads. (ps: I'm using 124gr plated bullets)

But I'm wondering if anyone using either of the 2 powders to reload for 75B 9mm? What are your loads?
 
I am just starting developing but did have success with 6.0gr of power pistol in my CZ shadow. Using fmj 124gr w/CCI primers. I keep my OAL to 1.115 and all worked flawlessly. Muzzle flash was more than expected but I am indoor. Great accuracy. I am impressed by P.P. and will be using it more.
 
I loaded my ammo for BB course with power pistol. People were asking what my load was; said it was too laud :p it was flashy too alright! I think it was 6.2, it gets pretty snappy a 6.5gr and muzzle flash is pretty impressive for a 9mm. ;) I'd love to chrony that load....

I decided to use N350 for indoor matches. No flash, makes it easier to see the target.
 
Working up some reloads for my Shadow recently I tried some 1.10, 1.110, 1.120 and 1.130 overall length loads using 124gn round nose bullets. The 1.130 jammed and prevented the slide from going into battery. The others all shot fine.

A fellow shooting buddy with a Sig tried my 1.130 loads and pronounced them "worthy" but that didn't help me any... :D

I know that the length issue wasn't your question but it helps point out that if the reloading info doesn't allow for the shorter options than you need to work up your own loads or go to another powder.
 
You must log in or register to reply here.
Back
Top Bottom