Armourer AR 15 assembly?

Moparman1303

Moparman1303

CGN frequent flyer
Rating - 100%
57   0   0
Location
Ontario, Canada
So i got all my parts and need my upper assembled. Anyone know of a place in Ontario or Canada that can assemble them? Not sure if i want to assemble my first upper but looking for ideas.
 
I'd recommend that you do it yourself, you've got to learn some time. Make sure you get the proper tools, vice block, torque wrench and a good armorers wrench. Ask lots of questions and watch youtube videos. It really isn't that hard to do.
 
I say do it yourself
It's not rocket surgery. It's not even brain science.
I did mine myself with zero experience. Take your time. Buy the right tools and you'll be fine. Besides; you're gonna want the tools down the road either way.

Shoot straight
 
Are you located near Ottawa? I dont mind giving you a hand. I have built a few uppers, and have the tools required. (at least the ones that make it much easier)

if not, find a friend from your club, or local area if you are nervous.... but you could figure it out on your own.
 
Upper vice block.. Get one off amazon.ca.
Ar-15 wrench... They are pretty easy to get. But get the one with the barrel nut tool. (Not just the buffer tube wrench)
Brass/nylon hammer is a good investment, it is not required... But I guess it depends how careful you are.
Also some good punches, both roll pin punches, and regular ones.

Here are some links to examples:

http://www.amazon.ca/Wheeler-156-44...955110&sr=8-1-fkmr0&keywords=Upper+vice+block

http://www.amazon.ca/Barska-AW11169...8&qid=1392955155&sr=8-1&keywords=Ar-15+wrench

These are pretty cheap and will do the job. Plus amazon prime free shipping :)
 
Last edited:
Daver_II said:
Upper vice block.. Get one off amazon.ca.
Ar-15 wrench... They are pretty easy to get. But get the one with the barrel nut tool. (Not just the buffer tube wrench)
Brass/nylon hammer is a good investment, it is not required... But I guess it depends how careful you are.
Also some good punches, both roll pin punches, and regular ones.

Here are some links to examples:

http://www.amazon.ca/Wheeler-156-44...955110&sr=8-1-fkmr0&keywords=Upper+vice+block

http://www.amazon.ca/Barska-AW11169...8&qid=1392955155&sr=8-1&keywords=Ar-15+wrench

These are pretty cheap and will do the job. Plus amazon prime free shipping :)
Click to expand...

Will that vice block work with A3 uppers. I see it only says A2.
 
Daver_II said:
Upper vice block.. Get one off amazon.ca.
Ar-15 wrench... They are pretty easy to get. But get the one with the barrel nut tool. (Not just the buffer tube wrench)
Brass/nylon hammer is a good investment, it is not required... But I guess it depends how careful you are.
Also some good punches, both roll pin punches, and regular ones.

Here are some links to examples:

http://www.amazon.ca/Wheeler-156-44...955110&sr=8-1-fkmr0&keywords=Upper+vice+block

http://www.amazon.ca/Barska-AW11169...8&qid=1392955155&sr=8-1&keywords=Ar-15+wrench

These are pretty cheap and will do the job. Plus amazon prime free shipping :)
Click to expand...

IMHO do not buy the barska wrench.. spend the extra 15 bucks and get a tapco that actually fits..

but yeah.. amazon and ebay rock!
 
You're just up the highway from One Shot Tactical in Trenton, and I think S&J hardware is in Belleville.

I'm sure one of them could help you if you don't want to do it yourself.
 
bobbynewmark said:
IMHO do not buy the barska wrench.. spend the extra 15 bucks and get a tapco that actually fits..

but yeah.. amazon and ebay rock!
Click to expand...

Yeah, it was the first link... I have a much nicer once at home..
I have no experience with the barska one.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom