Arms 40 Buis

[Paulinski]

Hey Guys

Damn I took my new 11.5 upper today to the range. The gun run flawlessly but my Aimpoint died and the side screw backed out of my Arms-40 it fell in the grass and that was the end of it . Where can I get a replacement screw.

Thanks in advance

Paul

 

[sparhawk]

contact ARMS directly... and use locktite next time

 

[Paulinski]

Thanks.

Should I also put locktite on all other screws - (Aimpoint Mount etc etc)

Thanks

 

[Liquid_Snake]

Use loctite 222ms It keeps them snug. If you want it to never move use loctite 262

 

[Paulinski]

Thanks for the info

 

[MikeyT]

Wow, bad luck - your aimpoint and BUIS failed at the same time?

 

[Chris7_62]

Call your dealer about the Aimpoint.

Try a hardware store for the screw, or can it and buy a Troy BUIS.

 

[koalorka]

What happened to the Aimpoint, what model was it? Or did the battery just die on you?

 

[Paulinski]

I think the Aimpoint has a bad switch or the wiring was not soldered properly. Its Comp ML3 2 Moa. Its going back to Aimpoint for warranty.
I was just finishing sighting it in fired a shot and the dot was gone. Thats aout in. Not all was wrong that day my 11'5" upper worked like a dream No malfunctions of any kind.

 

[Mr Wolverine]

We back up what we sell, so we have a good stock of spares for ARMS. Blue Loctite should have been provided with your sight. E-mail Ryan at: sales@wolverine supplies.com if you still need one.

 

[Boltgun]

We back up what we sell, so we have a good stock of spares for ARMS. Blue Loctite should have been provided with your sight. E-mail Ryan at: sales@wolverine supplies.com if you still need one.

nicely done John

BG