Attaching sling to Ruger PCC

[MrplVan]

Hi dear community.
Could someone please share their setup of a sling attached to a Ruger PC Carbine with M-Lok handguard and 6-position stock?
As I understand, there are multiple options. For the front part it is easy. An M-Lok mounted QD-attachment for a push-button quick release sling loop - pretty standard. I am wondering what you do on the stock?
Thank you.

 

[jacotsmith]

The particular Magpul stock that comes with the rifle from the factory has multiple slots to thread the sling webbing through directly without use of any kind of swivel/QD/HK hook/whatever.

If you want something detachable, you could swap out the stock for something with QD sockets, or thread a clip off an old backpack in line and keep the factory stock.

 

[rrnash]

There's a QD sling attachment hole just before the stock bracket, above grip's beaver tail, on both sides...

 

[5.45]

There's a QD sling attachment hole just before the stock bracket, above grip's beaver tail, on both sides...

one of those QD in the rear, Picatinny-mounted Magpul sling loop at the front of the receiver.

better to avoid mounting sling on the handguard to minimize bending force on the barrel-receiver coupling.

 

[MrplVan]

Thank you all for your advice.
After reading your comments, as well as some research online, I came to the conclusion that my best, most universal option would be Magpul MS4 sling. The only thing I am not entirely sure thus far is whether, for a 2-point attachment option, I should attach the front end of the sling to the handguard via a a MAG606 M-Lok QD mount or, as noted by 5.45 above, avoid it and add an attachment point at the front of the receiver.