Ballistol Gun Oil spray

604Gil

604Gil

CGN Regular
Rating - 100%
51   0   0
Hi all. Just a quick question. I have been looking online, searched through forums but there are so many different products out there. You guys know if Ballistol gun spray oil can be used on the stock, barrel and gun metal as a lubricant and a rust type protector? Thanks in advance.
 
Yes to all, I am a little obsessed with this stuff. Neutralizes acids, act like a mild solvent, lubricates. Bio degradable and totally edible. Good down passed -40C if you shoot in the cold

I find it works great on wood and leather, really deep penetration on some leathers. I’ve used it on wood furniture around the house.
 
AfroCowboy said:
Yes to all, I am a little obsessed with this stuff. Neutralizes acids, act like a mild solvent, lubricates. Bio degradable and totally edible. Good down passed -40C if you shoot in the cold

I find it works great on wood and leather, really deep penetration on some leathers. I’ve used it on wood furniture around the house.
Click to expand...

Though I use Ballistol on all my guns you must either be single, wife has no sense of smell or she’s a keeper.
 
StoneHorse said:
All good points except I wouldn't consider it an edible. The wife hates the smell but I don't mind it.
Click to expand...

Agree. Need to clean my guns when she's out.
Main ingredient is mineral oil, I believe, so not really edible, but won't kill you.
Helps with constipation.
 
From their site, it gets a little dark as they're pretty blunt about animal testing. This is also the more concentrated oil that was originally co-developed circa WWI as an antiseptic and lubricant much like vaseline was.

"TOXICOLOGY: In various feeding experiments with rabbits, guinea pigs and dogs it could be demonstrated that Ballistol does not have any acutely toxic properties. The test animals were given 2 grams per kilogram bodyweight, which did not cause even the least chronic health damage. This is not only true with single experiments but also with a series of experiments that were carried out over a time span of seven days. It can also be asserted that little two-year-old children who erroneously drank out a 50 ml-bottle did not show any pathological symptoms apart from a little hangover like it appears after drinking too much alcohol. Within twelve hours the children were absolutely well again.

This observation coincides with the fact that a large number of huntsmen and shooters use Ballistol internally when they suffer from digestion problems or heartburn. Several reports maintain that even year-long use does not damage your health.

The disinfecting power of Ballistol has also been investigated. According to these investigations the bacterium staphylococcus auras is killed by undiluted Ballistol within three to ten minutes, whereas typhoid, paratyphoid, and tuberculosis germs cannot survive one minute. The coli bacillus was dead after three minutes."
Click to expand...

As for the smell: Definitely seeing someone, they don't mind. Brother hates it, it grew on me.
 
Last edited:
Excellent stuff - I put it on everything!

My biggest problem with it is where to find another big refill. A sewing machine place in Toronto seems to stock it, but I am never in the big city anymore.
 
AfroCowboy said:
Yes to all, I am a little obsessed with this stuff. Neutralizes acids, act like a mild solvent, lubricates. Bio degradable and totally edible. Good down passed -40C if you shoot in the cold

I find it works great on wood and leather, really deep penetration on some leathers. I’ve used it on wood furniture around the house.
Click to expand...

All of the above and it Doesn't Taste ''That'' Bad.
 
stewbud said:
Excellent stuff - I put it on everything!

My biggest problem with it is where to find another big refill. A sewing machine place in Toronto seems to stock it, but I am never in the big city anymore.
Click to expand...

CT carries the spray can. You can remove the sprayer and use it as a refill.
 
The quality of connections is very important in any industry. Even the most durable materials without proper connection, no more than a set of parts. In order to create a single whole from these parts, for example, a weapon that could withstand various high loads and environmental influences. Each of you knows what happens to the thread after a few years if it is not processed in any way, and not unscrewed from time to time. The threaded connection is exposed to corrosion, which tightly binds the two parts, as a result, if you need to Unscrew the bolt or nut, there are great difficulties. I understand how important oil is to you. After all, I myself recently faced the problem of finding the best tool for work. I had to paint my daughter's room for her birthday, but I didn't want to bother with brushes and a roller. After reading a lot of information on the forum, I realized that the best option would be a spray gun, and then I started looking for it. By a lucky chance, I came across https://www.palmgear.com/best-hvlp-spray-gun-reviews/ and I could easily choose the best one for myself. My daughter is delighted, I'm happy!
 
Last edited:
I use it on a my guns and knives, great stuff. Been using it for around 20 years and I cant complain about it with the exception it can be challenging to find at times. I ended up buying case of 12 cans from a sewing/vacuum repair shop in my city so i wouldn't run out any time soon.
 
You must log in or register to reply here.
Back
Top Bottom