Barrel bands
- Thread starter gerard488
- Start date
OUT of production for many years, friend.
Look in the Parts section of the EE, MILSURPS and RIMFIRES both; somebody might have a set.
You will also need a Nos-cap; it looked something like an SMLE but that one will not fit.
Also, you need good photos to work from. Can anyone post a couple of good photos of an 82 for this man?
Many of these were released as surplus, then the forward portion of the Forestock (which fitted together under the Band) was thrown way. You may have to make one from a piece of Walnut.
Good luck!
Look in the Parts section of the EE, MILSURPS and RIMFIRES both; somebody might have a set.
You will also need a Nos-cap; it looked something like an SMLE but that one will not fit.
Also, you need good photos to work from. Can anyone post a couple of good photos of an 82 for this man?
Many of these were released as surplus, then the forward portion of the Forestock (which fitted together under the Band) was thrown way. You may have to make one from a piece of Walnut.
Good luck!
Yes, I plan to make the forestock if I can find the rest of the parts such as bands and nose cap.I will need some photos and I will also need to find out the exact length of the stock to find out if mine has been cut behind the band or if it is still the proper length.
- Location
- WMU248 near Edmonton
I've got 2 and parts of a third model 82, one is complete with the proper peep site.
I may have a line on where to find metal parts for them, shoot me a PM with what you need.
I may have a line on where to find metal parts for them, shoot me a PM with what you need.
