I have quite a few 9mm pistols. I have found that the DRG brand cast lead bullet of 135g Round Nose works well in all of them, and for most, better than the other weights. I load this bullet with TiteGroup because I have a lot of it on hand and because for accuracy, it seems to work well. I load this combo at 3.0, 3.3, 3.6 and 3.9gr, and then note on each pistol what the preference is. Most prefer 3.3 or 3.6.
Today I tested this powder and bullet for velocity in a 1911 (5”) and a M&P (4.3”). I also calculated the Power Factor.
The velocity difference was not as great as I expected.
M&P 9 (4.3”)
3.0gr 901fps & 121.6 PF
3.3gr 953fps & 128.6 PF
3.6gr 1027fps & 138.6 PF
3.9gr 1073fps & 145 PF
1911 (5.0”)
3.0gr 932fps & 125.8 PF
3.3gr 950fps & 128.2 PF
3.6gr 1060fps & 143 PF
3.9gr 1124fps & 151.7 PF
Today I tested this powder and bullet for velocity in a 1911 (5”) and a M&P (4.3”). I also calculated the Power Factor.
The velocity difference was not as great as I expected.
M&P 9 (4.3”)
3.0gr 901fps & 121.6 PF
3.3gr 953fps & 128.6 PF
3.6gr 1027fps & 138.6 PF
3.9gr 1073fps & 145 PF
1911 (5.0”)
3.0gr 932fps & 125.8 PF
3.3gr 950fps & 128.2 PF
3.6gr 1060fps & 143 PF
3.9gr 1124fps & 151.7 PF


















































