Barrel Thread Sizes

[Andy]

Can anyone point me to a source for barrel thread sizes for a variety of actions? E.g.

Mauser Large and Small
Win M70
Rem 700
Browning
Various Milsurps
etc.

A comprehensive list would be a good sticky.

 

[cosmic]

Frank de Haas - Bolt Action Rifles... available in delete bins at major book stores....

 

[art.h]

yes if you can find one, buy it and treasure it, art

 

[kayceel]

Possibly easier to find is Roy Dunlap's " Gunsmithing" - frequently show up on eBay under - gunsmithing - but mine was a $2.00 garage sale find. Also contains a host of other tech data for firearms / cartridges from about the mid '60's and prior.

 

[RePete]

Can anyone point me to a source for barrel thread sizes for a variety of actions? E.g.

1. Mauser Large and
2. Mauser Small
3. Win M70
4. Rem 700
5. Browning
6. Various Milsurps
etc.

A comprehensive list would be a good sticky.

1. 1.100" x 12V TPI
2. 0.980" x 12V TPI
3. Pre 64 1.00" x 16V TPI
4. ?
5. ?
Ruger M77 0.998" X 16vtpi
6. MilSurp

Mod 24 Yugo Mauser .700" x 12V TPI
MAS M-1936 .980" x 16V TPI
91 Mosin Nagant .980" x 16V TPI
US Krag Jorgensen .940" x 10 sq TPI
Norwegian Krag 1.050" x 12 sq TPI
Danish Krag 1.060" x 12V TPI
Springfield 03, 03A3, 03A4 .990" x 10sq TPI
1917 Enfield 1.085" x 10sq TPI

This is a start.

RePete.

 

[klondike bob]

trheads size yugo

700. inches o.d. on the yugo does not compute ,being a basic mauser .980" or 1.100" is more likely to be the wright size, tread picht normaly 12 tpi. Bob

 

[RePete]

700. inches o.d. on the yugo does not compute ,being a basic mauser .980" or 1.100" is more likely to be the wright size, tread picht normaly 12 tpi. Bob

All of the info came from Frank de Haas' book "Bolt Action Rifles".

RePete.

 

[dan belisle]

There were some Mausers built with thick receivers that used smaller diameter barrel shanks, certain Turks come to mind, if my memory hasn't failed me. - dan

 

[klondike bob]

turk m98 barrel thread

just happen to have taken aparts many 1903 turks m98 variants thread size is .980x12 whit a receiver ring of 1.400 inch. Bob

 

[buckbrush]

turk mauser is a small thread, large ring mauser. For lots of barrel thread info buy "NRA gunsmithing guide". I am not sure if it is still in print.

 

[maple_leaf_eh]

700. inches o.d. on the yugo does not compute ,being a basic mauser .980" or 1.100" is more likely to be the wright size, tread picht normaly 12 tpi. Bob

There are other differences with the Yugoslavian Mausers than just the barrel thread, like guard screw spacing. They are not compatible with Herr Doktor Mauser's Model 1898. Don't blame the internet, blame Tito.

 

[ackleyruger]

try this site
http://groups.google.ca/group/rec.g...83bcfb6c848/159655da02374eda#159655da02374eda

 

[dan belisle]

The guard screw spacing on the Yugos is for the intermediate length. Nothing "wrong" with it, it was used in other actions as well (such as the 36 Mexican). Basically, mausers come in three receiver ring sizes, two thread diameters, and three lengths. And yes, they sometimes mixed and matched to make the customer happy. - dan

 

[dan belisle]

Oh, and I believe that the books mentioned in previous posts are now available on DVD from Wolfe Publishing. - dan