BCL-102 Barrel wrench

[Bazzoka_Joe]

Hi, what wrench i need to remove the barrel extension nut on the bcl-102?

 

[JaredP]

the barrel nut is two-piece. the outer piece times the gas tube hole and handguard screw holes. the inner piece is what is actually torqued.

a crescent wrench will do loosen the inner piece.

although to retorque you'll need the correct crows-foot wrench. I just guessed on re-torque.

 

[smokenhope]

You can also use a reaction rod and put the nut in a vise

 

[Bazzoka_Joe]

for the outer pieces what wrench i need to removed it?

 

[smokenhope]

for the outer pieces what wrench i need to removed it?

Once you break the inner nut loose the outer piece should spin freely. I did find on retorque that timing the outer nut with the proper torque on the barrel nut took a few tries. Once you get the handguard off you will see what you need to do

 

[Bazzoka_Joe]

thanks for the help!

 

[ScreaminSpeed]

True North Arms have the Barrel wrench for 15 Bucks and 7.95 shipping flat rate ! Also reaction rods and so on, good guys to deal with.