Beartooth bullets dealer in Canada?

cariboo_kid said:
Does anyone in Canada carry these bullets, or do they need to be ordered direct from the states?

TIA :)
Click to expand...

I tried already to order from the states, and they would not ship to Canada :(
Want some for my .444 ;)
 
I used to cast but now get all my cast bullets from a guy locally. He has quite a variety, they're readily available, the quality is good and prices very reasonable. If you're interested, send me a PM and I'll forward contact info.
 
I had a custom mould made up by Mountain Moulds.
It casts a 340 grn WFN slug which I size to .433 (perfect for the microgrooves) and GC
The bullet will stabalize in both my 444S rifle with a 1/32 twist, even at reduced velocities of 1850 fps.
I have been using these bullets for 2 yrs now with excellent results. With the right load they are grouping 1" @ 100 yrds.
If anyone is interested in purchasing some of these shoot me a PM
 
Not to date. I have only shot the slug in microgrooves and ballards
It will all depends on the diameter your bbl slugs out at. With the microgrooves it is .432 - .433, with ballard .431 -.432 seems to be the norm.
I would suspect Galiards would hold a tighter tollerance, but the .433 slug would most likely work well
 
I can't say for sure but I think I saw them at wholesales calgary store, I was there today at lunch and picking up some 44 cal 250 partitions HG's for my muzzle loader.

Are the lables brown?
 
tucker05 said:
Not to date. I have only shot the slug in microgrooves and ballards
It will all depends on the diameter your bbl slugs out at. With the microgrooves it is .432 - .433, with ballard .431 -.432 seems to be the norm.
I would suspect Galiards would hold a tighter tollerance, but the .433 slug would most likely work well
Click to expand...

Too slow filling my coffee cup this morning, I meant ballard but had also been looking into a custom barrel for another rifle and got the names mixed up...

I am waiting to hear what another fellow has in stock and will likely place my first order with him as I've made many purchases from him in the past, and he can also supply dies and a few other bits I need. I would be interested in trying yours next time around though. :)

Aulrich: I was told they have the bullets from cast performance, but their website says they won't be doing any mail or phone orders for a few weeks. :(
 
Apparently the ballard rifling doesn't pose a problem but the micro grove is slightly more finicky. In my 444P with micro grove I try for hard cast and sized 0.001" - 0.002" over bore diameter. Seems to work well.
 
You must log in or register to reply here.
Back
Top Bottom