BENELLI M4 +1 Canadian Legal MAG EXTENSION

[badboybeeson]

BENELLI M4 +1 Canadian Legal MAG EXTENSION

$99

https://www.sjhardware.com/product/benelli-m4-2-mag-extention/
This will allow +1 round of 3 inch magnum shot shell in a limited cap factory mag tube.

No tools needs
Use factory spring machined from solid 4140 steel
Controlled gas nitride finish

no# new spring is needed as factory spring works perfect
Made in Canada

 

[badboybeeson]

Btt

 

[Canadian-Sniper]

BENELLI M4 +1 Canadian Legal MAG EXTENSION

$99

https://www.sjhardware.com/product/benelli-m4-2-mag-extention/
This will allow +1 round of 3 inch magnum shot shell in a limited cap factory mag tube.

No tools needs
Use factory spring machined from solid 4140 steel
Controlled gas nitride finish

no# new spring is needed as factory spring works perfect
Made in Canada

Any chance we could get some of these for the Beretta 1301 tactical???

 

[badboybeeson]

Any chance we could get some of these for the Beretta 1301 tactical???

These are Being made right now
Flush fitting mag for the1301 with the 18.5 inch bbl
We are finishing up run of mag tubes.
When here is op 1 and 2 completed

 

[Canadian-Sniper]

These are Being made right now
Flush fitting mag for the1301 with the 18.5 inch bbl
We are finishing up run of mag tubes.
When here is op 1 and 2 completed
View attachment 502434

Looks great. Will that be a plus one?

 

[ZEN403]

I have one something similar on my M4 from yall... A great piece of kit to add to the best semi-auto shotgun there is.

 

[badboybeeson]

Btt

 

[badboybeeson]

Btt

 

[davide montini]

Christ if I wasn’t so freaking busy you guys would do my benelli and 1301.....son of a biscuit work !!!...freak work !!
It will get done ...one day soon when my work slows down ...you guys are doing it !! For me

 

[badboybeeson]

Christ if I wasn’t so freaking busy you guys would do my benelli and 1301.....son of a biscuit work !!!...freak work !!
It will get done ...one day soon when my work slows down ...you guys are doing it !! For me

Thanks man. We are ready when you are

 

[mastermind]

Does the finish match the factory tube or barrel?

 

[badboybeeson]

Does the finish match the factory tube or barrel?

Yes it's flat black cerakote

 

[PinaKaleada]

Hey suggestion to your product, you need to bore out that heavy solid section out from the very front. Otherwise it’s too muzzle heavy. Just leave a small reduced diameter area to limit the capacity.

 

[badboybeeson]

Hey suggestion to your product, you need to bore out that heavy solid section out from the very front. Otherwise it’s too muzzle heavy. Just leave a small reduced diameter area to limit the capacity.

We tried that spring gets caught up .
It only added 100 gr to the weight

 

[crazy insane]

Sandvik, you've got good taste

 

[badboybeeson]

Sandvik, you've got good taste

Only the best,it cost to much to make s**t products

 

[PinaKaleada]

We tried that spring gets caught up .
It only added 100 gr to the weight

I did it myself and if 100 grams is what it added on top of the 139 grams, that’s a 42% weight reduction… at the front end of the 18.5” lol!

And the spring did not get hung up at all you don’t have to drill that big diameter all the way, just leave that small hole for air venting at the inside. Do it man

 

[mastermind]

Can you share pics of it installed? I am curious how closely this matches the factory tube.

 

[B]

Hey suggestion to your product, you need to bore out that heavy solid section out from the very front. Otherwise it’s too muzzle heavy. Just leave a small reduced diameter area to limit the capacity.

If he isn't even making them properly I am glad I missed out. I can limit the tube myself I don't need it left unfinished, wow.

 

[badboybeeson]

If he isn't even making them properly I am glad I missed out. I can limit the tube myself I don't need it left unfinished, wow.

What??