Benelli Super Nova mag extender needed

SamMalone said:
That looks nice. If I'm reading the pic correctly, that is almost at the end of the barrel, but not past it?
Click to expand...

No, not quite past it close to flush. It's a 24" Benelli rifle sighted slug barrel and a +5 extension if memory serves. One thing I noticed, is that the clamp I got with the kit wasn't quite radiused right so pulled the barrel and tube together, out of parrallel. I am going to try another mag clamp though so far got away with only having the tube done up tight
 
SamMalone said:
Looking at this again, how did you mount the red dot?
Click to expand...

That is a Burris Fastfire III (3 MOA) mounted on a Burris Speedbead. I believe the newer Supernova Receivers are drilled and tapped or have a dovetail in them so you might find an easier solution than that
 
SamMalone said:
I see you are ready for the zombie apocalypse... :) If I couldn't hit it with all those I'm in real trouble. The shot doesn't hit that with it being so long?
Click to expand...

I compete in 3 gun against semi auto guys so the more ammo in the gun the better. They may be faster on the trigger but after 9 shells they are reloading while I'm still shooting.
 
SamMalone,

Here's some close up pictures

3VY2PnG.jpg


GQH4Cgs.jpg


JAkPwtK.jpg


Hope that helps.

PS: Haven't added a clamp yet, just "Loctited" the tube into the barrel nut and will see how it holds up.

So far, so good but only put ~50 slugs through it

Scrummy
 
Scrumbag said:
SamMalone,

Hope that helps.

PS: Haven't added a clamp yet, just "Loctited" the tube into the barrel nut and will see how it holds up.

So far, so good but only put ~50 slugs through it

Scrummy
Click to expand...

Thanks! That SpeedBead looks interesting... might consider that down the road. I ended up with a Carlsons extension. Can put 10 in the mag and one in the chamber so I think I'm good to go. Only had the opportunity to use it once so far, but it works well.
 
You must log in or register to reply here.
Back
Top Bottom