Beretta 1301 mag ext

M

mallard12

Member
Rating - 100%
4   0   0
Is there a mag extension for a Beretta 1301? Currently I can fit five 2/34 inch shells tightly but only four 3 inch shell. If there is one, who sells it?

Thanks
 
the factory mag will take 4 rnds of 3" and 5 rnds for 2 3/4 without the plug, for the extension you can use any supernova mag extension, Mine is the Nordic plus 1
 
Problem is finding them in Canada.

US? No problemo, Canada? Good luck. Importing is expensive.

My buddy just imported the +6 Breily (Supernova, settle down guys), and it was 185$.

Lawry Shooting Sports in Ontario.

THAT being said, I have a 1301 as well and would be interested. I was thinking of getting a +6 to run on my Supernova AND put a plug in it to run on the 1301. One extension, two guns... (I haven't exactly measured it out yet to see if it works...)

I know it would take some pre-inspection at every comp I went to though... Everybody would be saying I'm running a prohibited gun...
 
Thanks Guys

I sent a few emails out last night, most of the replies were no. I called my LSG store and they had a Carlson 7 shot in stock for a Super Nova. I cut a piece of dowel 2 1/2 inches and installed it in behind the spring. I can now load six 2 3/4 inch shell with a little room to spare but not 6 3 inch shells so it's perfect.

Waiting for some 2 inch shells, anybody try them in a 1301? Wonder if they cycle reliably?

Thanks
 
You must log in or register to reply here.
Back
Top Bottom