After removing the barrel I want to remove the bolt carrier assembly. To remove it I first need to remove the handle on the bolt. How do I remove the small handle that is on the assembly, the one you use to pull back the bolt and #### the gun?
Beretta a303 question
- Thread starter Poppa Roberts
- Start date
There is no pin , if it hasn't been out in a while it may be a bit sticky. If you pull as hard as you can with your fingers with the bolt closed it should come out. If it is really stubborn then wrap a pair of pliers with a bunch of electrical tape so as not to mar the handle and use it to pull it out.
- Location
- Ontario Windsor area
I had an A301, 302, and 303...with the barrel off release the bolt forward, then pull it as hard as you can. I have a hard time with the 301 still and used pliers.
