Hey I guys I have recently accuired a beretta s55 O/U and im trying to find out info on them, more so how much they should run for the better type of 2 3/4 ammunition I should be running through it. So far I know that one barrel is full choke and the otger is modified but that all the real info I have managec to get. Im also intrested in anyone haveing info on the s55 O/U E which has ejectors. So far I have run target load through it and it has been a dream to shoot. Very well made and light, it its very accurate and I have been extremely pleased with this shot gun. If anyone out there has info on where I could buy another one of anything on parts and types of loads I should run throuth it that would be great, thanks!
Beretta s55 O/U E
- Thread starter remus1984
- Start date
You can find out all you want on Google. The action is very similar to the current 686, but not the same. I'm not sure I understand your question about ammunition. They are not suited for steel shot, and you can usually find the chamber length on the barrel flat, in mm.
gunsaholic
CGN Ultra frequent flyer
- Location
- Winnipeg, Manitoba
Not sure either what your ammo question is. I had an S57E which was a fancier gun. It was 2 3/4" chambers which I'm sure yours will also be. As already stated, that info will be stamped on the gun. It will handle any 2 3/4" load of lead shot. Some say not to shoot steel through older guns but if you open up the chokes I would not hesitate. It is not wise to shoot steel through an older full choke gun.
beretta boy
CGN Ultra frequent flyer
- Location
- Orillia, Ontario
Sounds like you have a Model S 55 B, introduced 1956, last listed 1971.
Most common in 12 & 20 gauge, but a few variations do crop up such as a 28 gauge and a 20/.222 shotgun/rifle combination gun. Barrel lengths of 67cm (26") 71cm (28") and 76cm (30"). All were chambered for 70mm cartridges (2-3/4") 76mm (3") chambers could be special ordered, as could stock drop & cast dimensions. Chokes from 6/10 to 10/10 or by special order....Field style rib with no side ribs. Single and double triggers, pistol grip or straigh tEnglish style stocks with hand checkering. Chrome lined high strength Chromium Molybdenum steel barrels. The S 55 B b.v. variation had matted ventilated ribs. The S 56 E had a vent rib and automatic ejectors. the S 57 E had all the features of the S 56 E with higher quality steel barrels and a modest amount of hand engraving and select walnut stock & forearm. The S 57 EL was the "extra lusso" version, fitted with sideplates and more elaborate engraving.
Beretta's first "production" type O/U, manufactured with parts interchangeability to allow manufacture "in the blue" without the need hand fitting for final assembly.
I've seen a good many standard S 55 B's go for $500 to $750, depending on condition.
Good solid upland gun. Not suitable for steel shot. Any modern 2-3/4" lead target or field load should be just fine.
Most common in 12 & 20 gauge, but a few variations do crop up such as a 28 gauge and a 20/.222 shotgun/rifle combination gun. Barrel lengths of 67cm (26") 71cm (28") and 76cm (30"). All were chambered for 70mm cartridges (2-3/4") 76mm (3") chambers could be special ordered, as could stock drop & cast dimensions. Chokes from 6/10 to 10/10 or by special order....Field style rib with no side ribs. Single and double triggers, pistol grip or straigh tEnglish style stocks with hand checkering. Chrome lined high strength Chromium Molybdenum steel barrels. The S 55 B b.v. variation had matted ventilated ribs. The S 56 E had a vent rib and automatic ejectors. the S 57 E had all the features of the S 56 E with higher quality steel barrels and a modest amount of hand engraving and select walnut stock & forearm. The S 57 EL was the "extra lusso" version, fitted with sideplates and more elaborate engraving.
Beretta's first "production" type O/U, manufactured with parts interchangeability to allow manufacture "in the blue" without the need hand fitting for final assembly.
I've seen a good many standard S 55 B's go for $500 to $750, depending on condition.
Good solid upland gun. Not suitable for steel shot. Any modern 2-3/4" lead target or field load should be just fine.
Thankx, to clarify my amunition question, I simply was concerned about steel going through the barrel and you guys confirmed that question. I just had a bit of a hard time finding out spacifics about the firarm. Thankx for all the info guys you have been a great help!
