Bergara 0 moa rail

J

Jemball

New member
Rating - 0%
0   0   0
Bergara BMR's only shipping with 30 moa rails is killer. I know it's great for NRL, but has anyone figured out a compatible rail?

Seems like USA and Europe have access to 0 moa rails, but not Canada :(
 
Why would you want a 0moa rail?
Are you attempting to shoot inverted or zero a tasco scope?

If anything, more would be best which could be achieved easily with rings
 
For rimfire I would prefer 50MOA myself... but 30MOA is a pretty good start to mount a scope that doesn't have a real lot of adjustment... I could see if you had multiple rifles and 1x scope that was in a 1-piece mount that you switched the scope between.
 
I'm usually not too fussed about which MOA rail is supplied with a 22LR. If I want more or less correction, I use Burris Signature rings. These rings offer other advantages besides being able to correct for elevation & windage. I swap scopes around a fair bit and have never marked a scope tube with Burris rings - A big plus when it comes time to replace an optic.
 
allan harris said:
I'm usually not too fussed about which MOA rail is supplied with a 22LR. If I want more or less correction, I use Burris Signature rings. These rings offer other advantages besides being able to correct for elevation & windage. I swap scopes around a fair bit and have never marked a scope tube with Burris rings - A big plus when it comes time to replace an optic.
Click to expand...

This is excellent advice. While avoiding marring the scope, Burris Signature rings with a canted rail will give all the elevation ever needed. Using the offset inserts, the XTR rings, for example, can provide up to 40 MOA elevation -- in 5 MOA increments -- over and above the 30 MOA in the Bergara rail.

Of course, if shooting only up to about 100 to 150 yards, a 0 MOA rail is perfectly fine.
 
You must log in or register to reply here.
Back
Top Bottom