Bolt roller advice...

[Pop]

A question for the gurus, on a scale of 1 to "my #### falls off" how big a pain is it to replace a bolt roller without a special tool?

 

[PitBull1973]

It's not hard you just need to make a tool

 

[notsorichguy]

A question for the gurus, on a scale of 1 to "my #### falls off" how big a pain is it to replace a bolt roller without a special tool?

Still have that roller-less bolt from last year 'eh?

If you have a roller and a clip, I'll swap you for a complete bolt from the tickle trunk at the clinic.....

 

[Pop]

Still have that roller-less bolt from last year 'eh?

If you have a roller and a clip, I'll swap you for a complete bolt from the tickle trunk at the clinic.....

Yeah it's been rattling around in the spares box and I finally tacked a roller and clip onto a Brownell's order to see what I could do about it

 

[Seafury]

I used a crimping tool for fishing weights I found at wholesale. Enlarged one of the holes and filed it thinner. Wormed first try once it was sized correctly.

 

[Pop]

Thanks for the advice folks, I played around with it for a bit and was finally able to get it installed with a pair of needle nose pliers and some considerable swearing

 

[Zdragunov]

Took me 5min with needle nose pliers, small ones..