Brass caatcher...M14

[Rule 303]

Has anyone brought to market a brass catcher for M14/M305/etc?

 

[M1-Garand]

I built a version that bolts onto the shooting bench with a C clamp,very crude,some 1/2 copper pipe,a base out of flat bar and some bug screen.
Works on all my semi's.

 

[dirtybarry]

Has anyone brought to market a brass catcher for M14/M305/etc?

Both UTG and Caldwell make universal fit brass catchers that attach with a velcro strap. I have a UTG and it looks like it should work but haven't tried it yet. For the <$16 that it cost I'll use it for something. Caldwell also makes one that attaches to a rail but it costs ~$45

 

[notsorichguy]

A 5 gallon bucket beside the rifle will usually catch 90% of my empties.....

 

[Grawfr]

I built a version that bolts onto the shooting bench with a C clamp,very crude,some 1/2 copper pipe,a base out of flat bar and some bug screen.
Works on all my semi's.

Same concept here (I should take a picture). Base is a short 6" length of 2x4" screwed on a 8" length of 1x6". The 2x4" has a hole drilled through to hold vertically a 3/4" wood dowel that's 24" long. Nylon screen door material stretched between two of those dowels, rolled around them when not in use. I can adjust the width of the "net" anywhere from 1 foot to 4 feet wide (way more than I need).

 

[Auggie Doggie]

ht tp://www.elmfg.com/store/brasscatcher.html#Anchor-2821

Auggie D.

 

[Carney]

Check out these guys! www.tacticalbrassrecovery They have catchers that mount to a rail and swing out of the way for cocking

Shawne

 

[Grawfr]

Ok, was at the range today so I took a picture:

The box is just the bottom of an old scope box, it works well. Next trip to C-T, I'm getting a pair of C-clamps to complete the setup.

 

[dogzilla]

All you need is a 5 yr. old, a face mask and a catchers mitt. And of course proper hearing protection

 

[Seafury]

8 X 10 tarp works well.

 

[theiss]

+1 on elmfg.com brass catcher.
They also made me a special rail clamp for my M25 from LRB.

 

[dirtybarry]

Just tried out the Caldwell rail mount catcher on my AR today and it works great. It has enough adjustment that it should work on anything with a top rail.