Brno 601
- Thread starter rgg_7
- Start date
Appreciate the responses and I've followed up on these. Still no extractor. The Brno ZKK 601 is unique to calibers. Mine is in 223 Rem. The other caliber offered was 243 and 308 Win. Looking at the cartridges will tell you the difference. Rim diameter of the 223 Rem is .378" with a thickness of .045". On the other hand the 243/308 Win has a rim diameter of .473" and thickness of .059". A 98 Mauser extractor will work on the 243 (have one of those as well) however won't on the 223. Difference is .095" or .0475" a side.
Must be one out there in somebodies drawer. I'd buy a complete or incomplete 223 bolt if that get me an extractor.
Ron
Must be one out there in somebodies drawer. I'd buy a complete or incomplete 223 bolt if that get me an extractor.
Ron
There was a time I got all of my spares from brno / cz directly from Czechoslavakia....no issues at all.
try :
http:// w .czub.cz/cz/eu-eshop
They do not appear to have the extractors listed online at present, but I have in the past bought them there.
A couple of years ago they still had various springs, pins, mags, extractors and other parts all on-line.
I suggest you email them. I do quite a bit; their English is better than my Czech.
try :
http:// w .czub.cz/cz/eu-eshop
They do not appear to have the extractors listed online at present, but I have in the past bought them there.
A couple of years ago they still had various springs, pins, mags, extractors and other parts all on-line.
I suggest you email them. I do quite a bit; their English is better than my Czech.
