Broken 223 decaper Upgrade

W

Weremey59

Member
Rating - 100%
2   0   0
Location
Calgary
Hello,

Surprise surprise I broke a decaper pin not paying attention to my brass. I don't want to go through Lee's warrantee because it was a pain in the ass the last time to get my molds replaced and they did a half ass job. I full length size. Here's my question,

Has anyone used these aftermarket decapper? https://www.amazon.com/Hardened-Steel-Decapping-Upgrade-90783/dp/B018V7L3C2

Will these work for my dies or do I need to go with pins that are 90694 ( which is the number for my 4 dies 223 set)?
 
on lee presision site purchase something cheap first and purchase your decaping pin and they will sent it to you for free I do that all the time
 
Weremey59 said:
Hello,

Surprise surprise I broke a decaper pin not paying attention to my brass. I don't want to go through Lee's warrantee because it was a pain in the ass the last time to get my molds replaced and they did a half ass job. I full length size. Here's my question,

Has anyone used these aftermarket decapper? https://www.amazon.com/Hardened-Steel-Decapping-Upgrade-90783/dp/B018V7L3C2

Will these work for my dies or do I need to go with pins that are 90694 ( which is the number for my 4 dies 223 set)?
Click to expand...

If you go to the link you posted at Amazon and read the reviews you will have your answer and it has a five star average out of 163 reviews.

I use a Lee universal decapping die and wet tumble most of my rifle cases before sizing and have never broken its decapping pin.

I'm always baffled when someone bends a lee decapping pin the expander when tightened by the dies collet is self centered.

The only way to bend the pin is if the flash hole is way off center or with Berdan primed cases and a simple case inspection will find these type cases.

QC9xK5D.jpg
 
You must log in or register to reply here.
Back
Top Bottom