BT-99 stock

[2tall2]

Can anyone tell me anything about the factory stock on a BT-99, with adjustable comb, like this one pictured?

Is the length of pull adjustable, or does this butt piece swivel?

I'm looking at pictures of one for sale, but haven't seen it in person. I'm unfamiliar with this type of factory stock. I also need longer than stock LOP, so curious how I will achieve it if this stock LOP is not adjustable.

I currently have a Graco adjustable LOP added onto original factory length Browning XT, giving me around 16" LOP.

 

[brucey]

Browning stock

Looks like it's off a BT99 Plus, the old style, which had the recoil reduction in the butt. There was also a Citori Plus with similar stock, so it cold be that one. look at the pix here

https://www.midwestgunworks.com/page/mgwi/prod/B133722B

https://www.midwestgunworks.com/page/mgwi/prod/B1793658

https://www.midwestgunworks.com/page/mgwi/prod/B1337124

 

[the spank]

Thats off a 90’s BT-99 Plus or Citori Plus. It is adjustable for length of pull, left or right offset(cant) and has a spring loaded recoil supressor system which is tension adjustable. If you look at the pic you’ll see an allen screw where the recoil pad plate screws onto the shaft. You loosen that screw and adjust the length of pull by spinning the pad in/out on the threaded end of the shaft. It’s been a while since I had a Citori Plus but if memory serves the lop adjusted from 13.5” to 15”? There is 3 grooves lengthwise on the threaded shaft to allow you to set the pad straight up or down or offset for left or right cant. They also had an adjustable poi rib with a range of 3”-12” above poa. Combined with the adjustable comb you could set them to pattern 100% above poa.

 

[2tall2]

Thanks for the responses. As it turned out, the photos supplied were just grabbed online somewhere, and not of the actual gun. The gun had the regular stock with an adjustable comb. Finally got it home today, will be trying it out tomorrow