Campro 38spl HBWC

Dsiwy

CGN Ultra frequent flyer
Rating - 100%
265   0   0
I just bought a bunch of Campro 38spl HBWC and wondering if anyone has loaded these before and has any advice?

I plan on using 3.2gr of bullseye with a roll crimp "Campro advises to stay above 800fps and data states 2.9gr-3.2gr"
 
Yes, but with HP38. I found their recommendation pretty good. They do seem to require more powder than the same bullet weight/shape in all-lead.
 
I have loaded a lot of these. Make absolutely sure you don't use cast bullet data. The 3.2 load is a good one.
 
I load tons of them. I load them a bit long and find a marked increase in accuracy. I am using a .357 pistol though... I have gone as high as 4 grains of Bullseye, 3.2 worked great, 700-750fps from a 4.2'' 686. Win 231 also worked good but the charge weights were higher, something like 3.8 grains for 750fps.
 
Weigh those CamPro 148 gr FCP HBWC. So far I’ve found in my box of 1000 bullets a large number of them weigh up to 8 grs more than 148 gr. I’m still in the process of grouping the bullets into small weight groups +- 1 grain. The 8 gr over weight is the highest I’ve found so far put I’m not even half way through weighing them. I am disappointed in the CamPro quality control I was expecting much less weight variation in a target bullet.
 
Back
Top Bottom