Can't find data for 138gr cast NLG MP boolit

dearslayer

dearslayer

Regular
Rating - 100%
11   0   0
Location
On The Edge
Want to finally do some loading for the cast boolit as mentioned. I was using 4.1gr of Win 231 for a 125 cast RN Lee boolit so would the charge be similar for the 138gr or should I use data for a 140gr cast boolit.. these are the cast boolits.
 

Attachments

  • IMG_20220523_203832.jpg
    IMG_20220523_203832.jpg
    65.4 KB · Views: 53
use the data for the 140 grain, and one with a similar bullet nose so your OAL is close to the same, would be super helpful if we knew what you were loading these in because I could give you some awesome data for something like a 8mm-08 rifle, or even 8mm-06 if I wasn't smart enough to know you were loading for a 9mm..........what grade of gas should you put in your car? depends on what kind of car it is........right???
 
yodave said:
use the data for the 140 grain, and one with a similar bullet nose so your OAL is close to the same, would be super helpful if we knew what you were loading these in because I could give you some awesome data for something like a 8mm-08 rifle, or even 8mm-06 if I wasn't smart enough to know you were loading for a 9mm..........what grade of gas should you put in your car? depends on what kind of car it is........right???
Click to expand...

Sorry about that for not providing that info. It would be for 9mm yes and used in either a CZP10C /shadow SP01 and a Norinco 1911. Honestly if I had to second guess I think I already may have trial loaded some of these but I can't seem to find any info that I may have written down. My record keeping simply isn't the best and that's a failure on my part.
 
The problem is the only data I could find for a 140 grain cast bullet doesn't include the powder I want to use which is.. Win231 or HP38.
 

Attachments

  • IMG_20220523_211636.jpg
    IMG_20220523_211636.jpg
    101.4 KB · Views: 41
You must log in or register to reply here.
Back
Top Bottom