Case Ejector System For RCBS Rockchucker

Fast Toys

Fast Toys

CGN Ultra frequent flyer
Business Member
Rating - 96.6%
28   1   0
Location
Winnipeg, MB
We just got these back in stock!

This system ejects your cases for you, allowing you to leave your right hand on the press lever and your left hand dedicated to feeding brass. It speeds up your single stage reloading significantly. Kit includes: Base plate, Ejection spring assembly, discharge ramp and 2 green bins.

The case ejector system is designed for versatility and can be installed directly to your bench-top or installed on any InLine Fabrication Ultramount press riser. The adjustable ejector plate attaches via your rightside press mounting bolt and stays compact to the press. This version fits the RCBS IV Supreme and the older RCBS RC1,2.

The base plate also includes die storage for (3) 7\8ths dies. (Only useable if your press is mounted on an Ultramount to provide the clearance underneath.)

This ejection system works perfectly with our Quick change system.

Note: Bin color is GREEN (not as pictured)

inline_fab_rcbs_case_ejector.jpg


Order on our web site: https://fasttoys.net/ca/Case-Ejector-System-For-RCBS-Rockchucker/
 
I have one of the originals made by RCBS. It's is a big time saver and reduces case handling by near 50% as you don't have to remove the case from the shellholder. Should come standard with the press.
 
ted_dent said:
I have one of the originals made by RCBS. It's is a big time saver and reduces case handling by near 50% as you don't have to remove the case from the shellholder. Should come standard with the press.
Click to expand...
I have had one of these since they first came out in the 80's. I can't understand why RCBS stopped making them as they are a great time saver. They were cheap too (less than $20).
 
You must log in or register to reply here.
Back
Top Bottom