Case neck cleaning brushes??

[islandkent]

Hey guys what are you guys using to clean your case necks after deburring? I only got about 500 cases out of my brush which I picked up at Bass Pro. The brand was Range Maxx. I know they are cheap but am I going to have to start buying them by the dozen? You can see in the picture the little bristles on the bench and you can also see the thin part of the brush. Dam line is taking away from that picture. Anyway any body getting better life out of there's? Brand suggestions? Thanks in advance.

 

[silverfoxdj]

I buy them in bulk at Brownells..

 

[track]

I use RCBS nylon brushes and they last forever, however they are performed manually.

 

[islandkent]

I buy them in bulk at Brownells..

Copy that silvefoxdj. So start buying more than two at a time.

 

[islandkent]

I use RCBS nylon brushes and they last forever, however they are performed manually.

I have one of those I don't use anymore since the graphite revolution. I'll give that a try.

 

[hometownhero]

Never done such a prosess

 

[rl4930]

I tried a brush wrapped with 000 steel wool to polish my case necks. Didn't notice a difference.

 

[porpoise]

i wipe the case lube out with a q tip after sizing. i dont see why i should brush them.

 

[islandkent]

I just use them to take a bit of carbon off. I thought it was the standard.

 

[mossyhorns]

Have one and have to admit I've never used it.

 

[islandkent]

Yep I use it every time. Like I said just in and out a few times that's it.

Not tonight though... Can vs Swe

Go CANADA!

 

[manitou210]

Patriot Series HD Nylon Bore Brush
http://www.proshotproducts.com/Patriot-Series-HD-Nylon-Bore-Brush_c_193.html
These are the best out there for cleaning necks that I have found, its a must to clean necks of carbon