Celik Chimera PB-223 Semi-Auto Hunting Rifle .223 Rem., 18.5" Barrel, CA-C-PB223-185 (Not the Aussie Version) uses AR-15 MAGS

Bullseyenorth

Bullseyenorth

Regular
Business Member
Rating - 100%
22   0   0
Location
London, Ontario
Available Here
Free Shipping Over $300, Flat Rate Shipping Under $17 Some Exclusions and Conditions Apply

IMG_4645.jpeg
IMG_4646.jpeg


The Celik Chimera PB-223 is a modern semi-automatic hunting rifle engineered for shooters who demand precision, reliability, and adaptability in the field. Now making its Canadian debut, the Chimera PB-223 delivers a refined balance of ergonomics, performance, and modular design, making it an ideal choice for hunters and sport shooters alike.

At its core, the Chimera features an 18.5" barrel with a fast 1:8 twist rate, optimized for stabilizing a wide range of bullet weights. The barrel is threaded at 1/2x28 and comes pre-installed with a muzzle brake to reduce felt recoil and muzzle rise for faster follow-up shots.

Out of the box, the Chimera PB-223 is ready for action, shipping with:

  • Two standard 5/10-round AR magazines
  • A durable Picatinny rail on the receiver for optics or accessory mounting
  • A complete cleaning kit for long-term maintenance
Weighing in at just 6.3 lbs, this lightweight yet rugged rifle ensures maneuverability without compromising stability or control. Whether you're navigating dense backcountry or setting up for a long-range shot, the Chimera adapts to your needs with confidence and clarity. For those seeking a more tactical edge, an optional pistol grip stock set is available, allowing you to customize the rifle’s look and feel to better match your shooting style. Whether you're upgrading your hunting setup or stepping into the world of modular semi-autos, the Celik Chimera PB-223 delivers unmatched value, versatility, and performance.

  • Caliber: .223 Rem
  • Barrel Material: AISI-SAE 4140 ( 42CrMo4)
  • Berrel Finish: Melonite
  • Barrel Length: 18.5" Threaded
  • Twist Rate: 1:8
  • Thread Pitch: 1/2x28 (with muzzle brake installed)
  • Receiver Material: 7075 T6 Aluminium Alloy
  • Magazine Capacity: 5 Rnd. Removable Magazine (AR15)
  • Operation: Gas Operated Semi Automatic
  • Safety: Trigger Block
  • Sights: Picatinny Rail
  • Length: 39.5"
  • Weight: 6.3 lbs
  • Part #: CA-C-PB223-185
  • Non-Restricted
Assembly Instructions for Chimera PB223 Rifle:

  1. Unscrew forend retaining nut from barrel assembly and remove forend from barrel assembly.
  2. Slide and hold charge handle retaining pin back to remove charge handle.
  3. Slide top action fixing pin out to the left side of the gun, but not fully out of the gun (there is a stopper on
    this pin).
  4. Line up dovetail of picatinny rail with dovetail on top of receiver, and slide barrel assembly fully into
    receiver.
  5. Insert long section of action fixing pin into left side of receiver, taking care to line up straight sides of
    pins of straight sides in receiver.
  6. Insert fixing pin screw into right side of receiver and tighten ***note this screw is reverse threaded.
  7. Slide top retention pin back into place.
  8. Slide charge handle retention pin back and re-insert charge handle.
  9. Slide forend back over bottom action and return forend retaining nut.
Assembly Tips:

  • Ensure the action spring guide rod is fully seated.
  • Ensure the top action fixing pin is fully at the stopper out to the left of the receiver.
  • Ensure the bolt is properly seated on action bar.
  • Ensure the picatinny rail dovetails into the receiver.
 
johnny the boy said:
I would imagine they will honor the lower price.Its Bullseye fer krist sake. I got this rifle from them a while back . Installed the rear stock kit and Tommy Enterprises tac fore end. I have no issues with this rifle.
Click to expand...
How do you like the Tommy Enterprises forend? What’s your overall impression of the rifle?
 
Bobert1212 said:
How do you like the Tommy Enterprises forend? What’s your overall impression of the rifle?
Click to expand...
I haven't shot mine much (about 60 rounds of 5.56 and .223)

Zero malfunctions (with METAL MAGS) of any kind with either ammo (55gr Federal American Eagle FMJ + 62gr Magtech FMJ)

Plastic mags did not work well at all (didn't try Magpul brand though, those are probably fine).

The accuracy from a concrete shooting bench with a rear bag and bipod was... the worst I've ever seen. To be fair, my bipod's tilt function is broken and does not stay locked, so maybe that's why?

I got it zeroed at 25m and intentionally left it about an inch low. I shot two 5-round groups at 100m and you'd think someone was freehand mag dumping their SKS with irons.

I was using a brand new Bushnell R5 1-6x24mm and no it was not loose or anything, I checked the rings and all that. I had the same results with both ammo.

I'm going to replace the bipod and try again.
I bought the gun gently used for a fantastic price with the pistol grip stock and I really like it; first impressions were good. I'll keep it if I can tighten those groups for sure.
 
20YearsOfTannerite said:
I haven't shot mine much (about 60 rounds of 5.56 and .223)

Zero malfunctions (with METAL MAGS) of any kind with either ammo (55gr Federal American Eagle FMJ + 62gr Magtech FMJ)

Plastic mags did not work well at all (didn't try Magpul brand though, those are probably fine).

The accuracy from a concrete shooting bench with a rear bag and bipod was... the worst I've ever seen. To be fair, my bipod's tilt function is broken and does not stay locked, so maybe that's why?

I got it zeroed at 25m and intentionally left it about an inch low. I shot two 5-round groups at 100m and you'd think someone was freehand mag dumping their SKS with irons.

I was using a brand new Bushnell R5 1-6x24mm and no it was not loose or anything, I checked the rings and all that. I had the same results with both ammo.

I'm going to replace the bipod and try again.
I bought the gun gently used for a fantastic price with the pistol grip stock and I really like it; first impressions were good. I'll keep it if I can tighten those groups for sure.
Click to expand...
How was the 62gr Magtech ammo in this rifle?
 
Mister Miyagi said:
How was the 62gr Magtech ammo in this rifle?
Click to expand...
It is by far the most inaccurate ammo I've ever had the misfortune of shooting. It ran flawlessly but it's like Stevie Wonder is behind the rifle. I've tried it in a Tikka, CZ, and CVA with bad results, not as bad the Chimera of course.

I've read user reports that got good accuracy out of theirs. I bought mine used, the ammo is known to be bad, and I have a faulty bipod so I'm not blaming the rifle. It was fun to shoot, I quite like it, however I'm a (relatively) new PAL holder so I've never handled an AR...

Idk if this ammo is always this bad, maybe I got a bad lot. I bought a bulk back for cheap. I've attached an image, I explained this "group" in my other comment above, don't feel like typing anymore. Those stickers are 4", I was aiming at the middle and top-right.
 

Attachments

  • PXL_20260321_224555481.jpg
    PXL_20260321_224555481.jpg
    106.2 KB · Views: 17
Last edited:
20YearsOfTannerite said:
I haven't shot mine much (about 60 rounds of 5.56 and .223)

Zero malfunctions (with METAL MAGS) of any kind with either ammo (55gr Federal American Eagle FMJ + 62gr Magtech FMJ)

Plastic mags did not work well at all (didn't try Magpul brand though, those are probably fine).

The accuracy from a concrete shooting bench with a rear bag and bipod was... the worst I've ever seen. To be fair, my bipod's tilt function is broken and does not stay locked, so maybe that's why?

I got it zeroed at 25m and intentionally left it about an inch low. I shot two 5-round groups at 100m and you'd think someone was freehand mag dumping their SKS with irons.

I was using a brand new Bushnell R5 1-6x24mm and no it was not loose or anything, I checked the rings and all that. I had the same results with both ammo.

I'm going to replace the bipod and try again.
I bought the gun gently used for a fantastic price with the pistol grip stock and I really like it; first impressions were good. I'll keep it if I can tighten those groups for sure.
Click to expand...
Great information. Thanks! Really interested in this rifle. Love the fact it shoots 556, unlike its Alcor counterpart. And the Backland is a joke both in price and performance, so not worth investigating for me. Interested to hear a follow up on accuracy when you have time to get out again.
 
Bobert1212 said:
Great information. Thanks! Really interested in this rifle. Love the fact it shoots 556, unlike its Alcor counterpart. And the Backland is a joke both in price and performance, so not worth investigating for me. Interested to hear a follow up on accuracy when you have time to get out again.
Click to expand...
Yes. As would I especially on this rifle being able to handle 5.56

If this thing is able to fire a different type of 5.56 (higher quality cartridge) accurately then that would be a game changer as the Backland Hunter seems to be, pardon the pun...'hit or miss'. Thank you gentlemen.
 
Mister Miyagi said:
Yes. As would I especially on this rifle being able to handle 5.56

If this thing is able to fire a different type of 5.56 (higher quality cartridge) accurately then that would be a game changer as the Backland Hunter seems to be, pardon the pun...'hit or miss'. Thank you gentlemen.
Click to expand...
Agree!
 
You must log in or register to reply here.
Back
Top Bottom